 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| XAA170 Dual Single Pole OptoMOS(R) Relay Description The dual 1-Form-A XAA170 solid state relay has two independent, optically coupled, normally open single-pole relays in a single 8-pin package. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 3750Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input. By incorporating two independent single-pole relays into a single 8-pin package, the XAA170 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. Blocking Voltage Load Current Max RON CPC1219YA 350 100 50 Units VP mA Features * Small 8 Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * EN/IEC 60950-1 compliant Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # Description XAA170 XAA170P XAA170PTR XAA170S XAA170STR 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack T&R (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount T&R (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON TOFF DS-XAA170-R03 www.clare.com 1 XAA170 Absolute Maximum Ratings (@ 25 C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 350 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mw / C Derate Linearly 6.67 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current, Continuous Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Capacitance Input to Output Conditions t=10ms IL=100mA VL=350V IF = 5mA, VL = 10V VL=50V, f=1MHz IL = 100mA IF = 5mA VR = 5V Symbol IL ILPK RON ILEAK TON TOFF COUT IF VF IR Min 0.4 0.9 Typ 33 25 0.7 1.2 3 Max 100 350 50 1 5 5 5 1.4 10 Units mA mA A ms ms pF mA mA V A pF 2 www.clare.com R03 XAA170 PERFORMANCE DATA* XAA170 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA) XAA170 Typical On-Resistance Distribution (N=50, TA=25C, IL=100mADC) XAA170 Typical Blocking Voltage Distribution (N=50, TA=25C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 25 20 15 10 5 0 Device Count (N) Device Count (N) 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 29.09 29.86 30.63 31.40 32.16 32.93 33.70 On-Resistance () 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (VP) 25 20 15 10 5 0 XAA170 Typical IF for Switch Operation (N=50, TA=25C, IL=100mADC) 25 20 15 10 5 0 XAA170 Typical IF for Switch Dropout (N=50, TA=25C, IL=100mADC) 25 20 15 10 5 0 XAA170 Typical Turn-On Time (N=50, TA=25C, IF=5mA, IL=100mADC) Device Count (N) Device Count (N) 0.44 0.50 0.56 0.62 0.69 0.75 LED Current (mA) 0.81 0.44 0.50 0.56 0.62 0.69 0.75 0.81 Device Count (N) 0.67 0.75 LED Current (mA) 0.83 0.91 0.99 Turn-On (ms) 1.06 1.14 25 20 15 10 5 0 XAA170 Typical Turn-Off Time (N=50, TA=25C, IF=5mA, IL=100mADC) Load Current (mA) XAA170 Typical Load Current vs. Temperature 160 140 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 120 0 -40 XAA170 Typical Leakage vs. Temperature (Measured Across Pins 4 & 6) Device Count (N) 120 100 80 60 40 20 IF=10mA IF=5mA IF=2mA 0.11 0.14 0.17 0.19 0.22 Turn-Off (ms) 0.25 0.28 0 -40 -20 0 Temperature (C) 20 40 60 Temperature (OC) 80 100 XAA170 Typical Blocking Voltage vs. Temperature 455 Blocking Voltage (VP) 450 Turn-On (ms) 445 440 435 430 425 420 -40 -20 0 20 40 60 Temperature (C) 80 100 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0 -40 XAA170 Typical Turn-On vs. Temperature (IL=100mADC) IF=5mA IF=10mA IF=20mA 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 XAA170 Typical Turn-Off vs. Temperature (IL=120mADC, IF=5mA) -20 0 20 40 60 80 Temperature (OC) 100 120 Turn-Off (ms) -20 0 20 40 60 80 100 120 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 XAA170 PERFORMANCE DATA* XAA170 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 XAA170 Typical Turn-On vs. LED Forward Current (IL=100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 XAA170 Typical Turn-Off vs. LED Forward Current (IL=100mADC) 0 5 10 15 20 25 30 35 40 45 50 Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Forward Current (mA) 70 60 On-Resistance () 50 40 30 20 10 0 XAA170 Typical On-Resistance vs. Temperature (IL=100mADC, IF=5mA) 6.0 5.0 LED Current (mA) 4.0 3.0 2.0 1.0 XAA170 Typical IF for Switch Operation vs. Temperature (IL=100mADC) LED Current (mA) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 XAA170 Typical IF for Switch Dropout vs. Temperature (IL=100mADC) -40 -20 0 20 40 60 80 Temperature (OC) 100 120 0 -40 -20 0 20 40 60 O 80 100 120 -20 0 Temperature ( C) 20 40 60 80 Temperature (OC) 100 120 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 XAA170 Typical Load Current vs. Load Voltage (TA=25C, IF=5mA) XAA170 Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Load Current (mA) -4 -3 -2 -1 0 1 2 3 4 Load Current (A) 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 XAA170 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package PC Board Pattern 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 9.144 TYP. (0.360 TYP.) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) 8.077 0.127 (0.318 0.005) 4.064 Typ (0.160 Typ) 3.302 (0.130) 7.239 TYP. (0.285) 7.620 0.127 (0.300 0.005) 0.889 0.102 (0.035 0.004) Dimensions mm (inches) 8-Pin Surface Mount Package 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 9.525 0.254 (0.375 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 4.445 0.127 (0.175 0.005) 3.302 (0.130) Recommended PCB Land Pattern 2.54 (0.10) 0.635 0.127 (0.025 0.005) 6.350 0.127 (0.250 0.005) 1.65 (0.0649) 8.90 (0.3503) 8.077 0.127 (0.318 0.005) 0.457 0.076 (0.018 0.003) 4.064 Typ (0.160 Typ) 0.65 (0.0255) 0.889 0.102 (0.035 0.004) Dimensions mm (inches) 8 Pin Flatpack Package 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.398 0.127 (0.370 0.005) 2.159 TYP. (0.085 TYP.) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) Recommended PCB Land Pattern 2.54 (0.10) 0.635 0.127 (0.025 0.005) 1.55 (0.0610) 8.70 (0.3425) 0.203 (0.008) 8.077 0.127 (0.318 0.005) 9.652 0.381 (0.380 0.015) 2.159 TYP. (0.085 TYP.) 0.65 (0.0255) 0.457 0.076 (0.018 0.003) Dimensions mm (inches) R03 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Top Cover Tape P = 12.00 (0.472) Ao = 10.30 (0.406) 1 8 W = 16.30 max (0.642 max) K0 = 4.90 (0.193) Embossed Carrier K1 = 4.20 (0.165) Bo = 10.30 (0.406) Dimensions mm (inches) User Direction of Feed Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 8 Pin Flatpack Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) 1 8 Bo = 10.30 (0.406) Top Cover Tape K0 = 2.70 (0.106) K1 = 2.00 (0.079) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) P = 12.00 (0.472) Ao = 10.30 (0.406) Dimensions mm (inches) Embossed Carrier User Direction of Feed Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-XAA170-R03 (c)Copyright 2007, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/9/07 6 |
Price & Availability of XAA1701
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |